Bocote Custom Deluxe Jump and Break Cue
(16 Ivory Hand Inlayed Rectangles)

I want you to have the very best cue money can buy because I want you to have absolute confidence when you come to the table. It’s easy when you know you have the best weapon. I want you to be the very best you can be!

My jump/break cues are built to do two things: Break and Jump. That is all they do, but they Jump and Break better than any other cue in the world because that is precisely what they were designed to do.

I put everything I know about wood and cue making into making the best Jump/Break cue in the world. It has taken years of experience but I have learned to use only the best seasoned wood because I want my cues to stay straight. I use the most accurate and best cutting-edge hardware because I want every part to fit together perfectly. I use theTerminatorShaftT3™because it is the best shaft I have ever seen or used. They play so well that I fitted them onto all my personal cues.

Because I use seasoned wood, Titanium Radial Pins and Uni-Loc® Quick Release Joint Pins and American labor It cost me more to produce one of my jump break cues than the other jump break cues you see on the market. When you spend more you have a right to expect more. We give it to you all the way from the day your cue was envisioned right up until you hit your first ball and discovered its awesome hit. Arnot Jump Break cues are fine cues from start to finish. With this cue in your corner you will Finish In The Money. Enjoy:

Only $859.00 (With Ivory Rectangles)
(Order One Today – You Deserve The Best)

Here is why the Terminator Jump Break Cue is the best of its class:

• Made from Bird’s Eye MapleForearm with a Bocote Butt (Wood seasoned more than 5 years)
• A TerminatorShaftT3™(Jump BreakTaper) for more breaking and jumping power
• A short ferrule to reduce bend
• A special very hard leather tip formore cue ball control
• Radial Pins for the best joint connectionand support
• Genuine Irish Linen (Black with WhiteSpecks) Wrap.
• Double Black Linen Based Fiber toreinforce the joints
• White Rambo Ring
• 16 Little Ivory Rectangles HandInlayed Into the Butt Sleeve
• Best of All - Your TerminatorJump Break Cue is Made In the U.S.A. By a Master Cuemaker

SEASONED WOOD – It doesn’t sound like much but it has taken me over ten years to acquire enough wood so that I will always have more than enough on hand at all times. Just to leave your investment sitting on the shelf for all this time takes an enormous amount of cash.

RADIAL PIN – Radial Pins or Uni-Lock Quick Release pins in the Jump Handle. These pins cost 20 times more than all the standard pins on the market. They are also 20 times more accurate and so smooth that there is no damage to the threads even after 25 years of service.

LINEN BASED FIBER – Atlas Double Black Linen Based Fiber is used for the Butt Cap and all Joint Collars. If you want your collars to stay on you should insist on the best. Do not settle for ABS or PVC or Delrin (I'm not a plumber!).

TerminatorShaftT3™– TheTerminatorShaftT3™ (Jump-Break Taper) is the very best taper whether you are Busting or Jumping Cue Balls. TheTerminatorShaftT3™is stiff that there is no loss of energy as the cue ball and the cue come slamming together.

WATER BUFFALO TIP – This cue comes complete with a Hard, Water Buffalo Tip because it transfers energy so quickly. This tip is better then the phenolic tip seen on so many jump break cues because even though it is very hard it still allows maximum cue ball control.

SHORT FERRULE – Arnot’s short ferrule design eliminates the flex of the tenon and reduces the overall weight of the ferrule/tip assembly. The ferrule material of choice is Melamine because of its strength and beauty.

TITANIUM RADIAL PIN – Lighter and stronger, we use a Titanium Radial Pin to connect the shaft to the jump handle to make the jump portion of this cue as light and strong as possible.

(Prices do not include shipping, handling or insurance.)